Openbox S10 HD|
Item SKU: 0585
Category: Satellite Receivers
The Openbox S10 HD PVR is a compact yet fully functional HD satellite receiver
Earn 124 SATVantage Rewards points with this purchase!
DISCONTINUED DUE TO SEVERAL HARDWARE DESIGN FLAWS. REPLACED BY OPENBOX S9 HD PVR The Openbox S10 is a high definition FTA satellite receiver that supports both DVB-S and DVB-S2 protocols along with both QPSK and 8PSK modulations. It features a quick and accurate hardware-driven Blind Scan and AC3 audio decoding to the analog audio output jacks. The Openbox S10 HD is also PVR ready to record your favourite programs or for time-shifting when an external hard drive is connected to the unit (not included). SPECIFICATIONS: - 250 MHz IBM PowerPC Processor (350 Mips) - 2 status LED lights - Linux Operating System - Full automatic service scan - Supports direct bouquet-lists (indirect unlimited) - Supports DiSEqC multiple LNB-Switching control - 1 x Smartcard-Reader - 5000 TV or Radio channel capacity - MPEG 2 & MPEG 4 Hardware decoding with 4.2.0 video - Channel-change time < 1 second - Fully adaptable OSD in many languages (skin-support) - 100Mbit full duplex Ethernet Interface - Supports EPG (electronic program guide) Video decoder: Video Compression MPEG-2 and MPEG-4 compatible Video Standard PAL and NTSC Video Formats 4:3 / 16:9 Letterbox precolating for 4:3 TV-Device Audio decoder: MPEG-1 & MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard Ethernet: 100 MBit compatible, bi-direktional interface Function Update of Firmware and Preprogramming Output digital: HDMI output for digital video and sound Output analog: Composite A/V output Output Level L/R 0,5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Serial Interface RS 232: Typ RS232 bidirectional Bit rate 115,2 kBit/s max. Plug Connector SUB-D-9 Function Update of Firmware and Preprogramming Power consumption: < 10W / 12V Input voltage: DC12V,alternating acurrent +/- 15% External power supply: Input: 110-240V AC / 50-60Hz / 0,6A Output: 12V = / 1A Others: Ambient Temperature +15°C...+35°C Humidity < 80%